Trampa use only the finest A4 Marine Grade stainless steel in all of their hardware which means your Trampa can be used and handle the harshest of environments...
Use an 3mm Allen or HEX key and a 10mm socket drive to tighten the nuts onto the bolts.
These Countersunk bolts will neatly fit bindings to decks within the range of 13-16ply
All bolts are dipped in Blue Glue paste to give the ultimate secure fix.
All nuts are fitted with the internationally renowned "Nylock" locking system.
Using A2 marine grade Stainless steel to provide the finest quality nuts and bolts, this 8 piece set consists of M6 x 25mm Countersunk Allun Key headed bolt with Blue locking paste, 6mm nylock nuts and 6mm form B washers. Perfect for the Trampa deck and an important upgrade when converting your trucks over to a new Trampa deck.
By using counter sunk bolts to fit the bindings to the deck we are able to ensure a flush whilst very secure fit to the deck, giving no nasty bolt exposure on the underside of the deck allowing the rider to board slide on any suitable obstacles.
The ply of the deck will determine the length of the bolt required as a 12ply Trampa deck is much thiner than a 17ply.
Trampa's stainless bolt range ensures a durable, strong and the perfectly neat finish to your deck.a corrosion free, strong and the perfect neat fitting.
The head of this Bolt is COUNTERSUNK, meaning that when screwed into position it sits flush & neat with the surface its screwed into. Preventing bolts from standing proud eliminates the chance of anything getting "snagged or hung-up" should it get caught on something..
Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts.
This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!
M6 x 25mm Countersunk Bolt Kit - Regular length. This bolt kit is used to fit the TRAMPA Bindings to regular ply TRAMPA decks, 13-16ply. Using the correct sized bolt gives you a nice neat finish to your deck.
All TRAMPA bolts are dipped in Blue locking paste whilst all of the nuts have been fitted with the world renowned 'Nylock' locking system to ensure the most secure fix possible. The countersunk bolt sits flush on the under-side of the board. Use a 4mm Allen key to hold the bolt & a 10mm ring spanner to tighten the nut onto the bolt.
Non-EU customers purchase tax-free
Approx price :