TRAMPA CAMLOCK BINDINGS are the number 1 choice of Binding for all top level Kite Boarders. The Camlock system allows the user to 'Lock the Bindings' in the desired position allowing easy step in / step out action. Should the board be dropped on the Bindings when attempting aerial maneuvers (or similar) the Cam-lock system stops the Bindings from "closing-up", which in turn allows the user to be able to easily put their foot back into the Bindings & continue riding without any hassle.
The EVA Foam Padding underneath the DuPont Plastic Foot Straps wrap snugly over the top of your foot but firm comfortable footwear is still advisable. The EVA Foam Padding is 'Ribbed' & 'TRAMPA Embossed' (proving quality) on the underside of the Footstrap, fine details like this help maintain the foot locked into the Bindings whilst riding at speed over rough terrain.
A Special Hook on the Base of the Camlock locates into a special slot on the top of the Footstrap. This clever 3 point connection prevents any movement in the connection of the Straps giving the rider the confidence in their equipment to concentrate purely on their riding. The Ladder strap will ultimately wear over time so give care to this part when adjusting it.
Stainless steel Dome Headed Bolts connect through the Footstrap into L-Brackets ensuring no discomfort to the foot. The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require. TRAMPA Bindings are supplied with a Marine grade A4 Stainless Steel deck fixing kit included. CAMLOCK style bindings are the serious Kite Board rider’s primary choice binding!
Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!
Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.
The head of this Bolt is COUNTERSUNK, meaning that when screwed into position it sits flush & neat with the surface its screwed into. Preventing bolts from standing proud eliminates the chance of anything getting "snagged or hung-up" should it get caught on something..
This Bolt is DOME HEADED, meaning that when screwed into position it sits low & neatly over the surface its screwed into. Preventing bolts from standing proud eliminates the chance of anything getting "snagged or hung-up" should it get caught on something..
The Camlock Buckle is an integral part of the Camlock Binding. Using a Marine Grade Stainless Steel M5 x 8mm Counrtersunk bolt to screw into a submerged Star Nut that is housed within the TRAMPA Ratchet style Footstraps & the TRAMPA Heelstrap Bindings. There is a spacial hook on the underneath of the CAMLOCK that positions into a special slot on the Footstrap. this special hook & Slot enables the camlock to fit very tightly, securing the ladder strap that is fed into it in the correct position whilst giving secure adjustment to the bindings to fit your foot size.
Unlike the Ratchet buckle, the Camlock will not open or close on you regardless of accidents, your bindings will remain in the same open position until the clip is un-done & the ladder is moved into a new position, this means they wont close on you even when deck lands Binding side down making them the perfect choice of binding option for Kite Boarders who potentially do soar great heights into the air whilst making board off maneuvers, inevitably the deck will get dropped, potentially on the bindings and should they close up on you like what might happen to Ratchet style bindings, (Ratchet Bindings are more suited to Mountainboarding) then this will make it very difficult to be able to get your foot back into the bindings especially when you have a huge kite in the air that you are attached to, opening up the bindings whilst the kite is dragging you around can be a real pain in the XXX, so always best to use Camlocks Bindings if you are Kiteboarding.
TRAMPA Ratchet style foot-straps are the strongest & most Sturdy bindings on the market! Ergonomically designed to ensure a comfy fit, TRAMPA Bindings will keep your feet, locked into the perfect position, enabling your board to be as responsive as it should.? The L Brackets are connected to the footstraps using Marine Grade Stainless Steel Extra Wide DOME HEADED BOLTS. These will not "Pull through" or interfere with the comfort on the side of your foot what so ever....
Our amazing foot-straps have a special "SLOT" on the top of the plastic strap to allow the "90º Hook" (found on the base of the Ratchet or Camlock Buckle), to locate into. This special slot locks the Buckle perfectly into place, eliminating any potential movement. A special Marine Grade Stainless Steel STAR NUT pushes into the foam from the underside of the strap & a 8mm countersunk bolt tightens the buckle firmly into the strap. Replacement foot-straps are sold as pairs & will fit both RATCHET & CAMLOCK Buckles. Ladder straps are sold separately.
TRAMPA L Brackets are made using 5mm thick Extruded T6 Aluminum. They should never fail on you. Once they have been forced through the die, the continuous L shape that comes out the other side is then punched into the shape you can see. Extruding aluminum gives the metal it the strongest molecular structure possible and it comes naturally with a high quality polished finish that is perfect for Anodising or Powdercoating. Before any surface coatings are added the L Bracket is sent away for more polishing, this extra polishing adds boldness to the shade and depth added to the colour. All L Brackets come with a complimenting TRAMPA logo. M5x20mm Dome head bolts hold the L Bracket to the Straps. M6x25mm Countersunk bolts hold the L Bracket to the deck. You can customise the position of the L bracket & strap to your requirements. Fits to all TRAMPA footstraps and most other brands foot straps & is compatible to fit to both MBS & Scrub boards. Ensure all your nuts and bolts are tight before riding!
Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts.
This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all Decks & also for the Dome Head Bolts connecting the L BRACKETS to the Bindings. Use an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!
The cerated edges of the nut cut into the foam of the footstrap & create a solid fix into the bindings. The nut pushes into the foam of the Binding holding the Ratchet in the perfect position. As a tip, use an axle spacer to push the STAR NUT into position within the foot strap. It needs a good push into position to ensure it doesnt rip free from the fixing.... Use M5 x 8mm countersunk bolt to fix Ratchet or Camlock into the Footstrap
Non-EU customers purchase tax-free
Approx price :